Do you have a troubleshooting section on your fryers?

1. Why did my deep fryer stop working?
2. How do you reset a deep fryer?
3. How do I reset my deep fryer?
4. Where is the reset button on a fryer?
5. How do you test a deep fryer element?
6. Why is my deep fryer overheating?

Why did my deep fryer stop working?

The most likely reason your deep fryer won't turn on is an issue with the power cord. Most deep fryer power cords connect to the unit magnetically, and can become easily disconnected if the fryer is bumped or moved. ... These parts heat the deep fryer, so if one is faulty, the unit will not turn on.

How do you reset a deep fryer?

If this should happen, firstly switch off and unplug the deep fryer. Wait until the element cools down. Use a pin or small screwdriver to push downward onto the reset button. This will reset the deep fryer.

How do I reset my deep fryer?

Unplug the power cord from the wall outlet and from the fryer socket. Wait until the deep fryer and the oil inside of it cool completely. This could take more than an hour. Press the small "Reset" button with the tip of a pen or pencil.

Where is the reset button on a fryer?

Reset Button

It usually is at the backside of the fryer and it's a small one. Push the button with a needle or a tip of a pencil for a while and now the fryer should be reset.

How do you test a deep fryer element?

You can use your multimeter to test the heating element in a similar way to the process you used on the power cord. The heating element must be completely removed from the appliance for testing. To test the heating element for damage, set up the multimeter in the same way you did when testing the power cord.

Why is my deep fryer overheating?

If your deep fryer gets too hot, it is likely due to a faulty thermostat. The thermostat may be broken and not signaling the correct temperature to the control board and heating element. Usually the whole control assembly needs to be replaced if one of the parts within it are faulty.