Eniac weight

ENIAC weighed 30 tons, took up 1,800 square feet of space, and was made of 17,468 vacuum tubes, 1,500 relays, 70,000 resistors, 10,000 capacitors, and nearly five million hand-soldered joints.

1. Did the ENIAC weigh 30 tons?
2. How much did the 1940s supercomputer ENIAC weigh?
3. How much did the first computer weigh?
4. How many pounds did the ENIAC weigh?
5. How big was the first ENIAC computer?
6. What does ENIAC stand for and how much did it weigh?
7. How large was the ENIAC computer how much memory did it have?
8. How much floor space did the ENIAC computer take up?
9. How large was the ENIAC computer and how much money did it have?
10. What happened to Univac?
11. How many vacuum tubes was used in ENIAC?
12. How much did the first computer weigh in tons?
13. How many kilograms did the ENIAC weigh?
14. What is the difference between ENIAC and Univac?
15. What is the difference between ENIAC and Edvac?

Did the ENIAC weigh 30 tons?

Eniac was impressive: 80 feet long and 8 feet high, weighing 30 tons, with 18,000 vacuum tubes, 70,000 resistors, 10,000 capacitors and 1,500 relays. It had a memory capacity of 20 words and was programmed by setting 6,000 dials and switches, a task that took a crew of workers many hours.

How much did the 1940s supercomputer ENIAC weigh?

ENIAC was enormous. It contained 17,500 vacuum tubes, linked by 500,000 soldered connections. It filled a 50-foot long basement room and weighed 30 tons.

How much did the first computer weigh?

Created by Presper Eckert and John Mauchly -- designers of the earlier ENIAC computer -- the Univac 1 used 5,200 vacuum tubes and weighed 29,000 pounds.

How many pounds did the ENIAC weigh?

(An iPhone 6, by contrast, can zip through 25 billion instructions per second.) When the Army declared ENIAC obsolete in 1955, however, the historic invention was treated with scant respect: its 40 panels, each of which weighed an average of 858 pounds, were divvied up and strewn about with little care.

How big was the first ENIAC computer?

ENIAC was enormous. It occupied the 50-by-30-foot (15-by-9-metre) basement of the Moore School, where its 40 panels were arranged, U-shaped, along three walls. Each panel was about 2 feet wide by 2 feet deep by 8 feet high (0.6 metre by 0.6 metre by 2.4 metres).

What does ENIAC stand for and how much did it weigh?

The ENIAC (Electronic Numerical Integrator and Computer), introduced at the University of Pennsylvania in 1946, was the world's first electronic digital computer. Weighing 30 tons and filling a 1000 sq. ft. room, the ENIAC consisted of 42 panels.

How large was the ENIAC computer how much memory did it have?

In 1953, the Burroughs Corporation built a 100-word magnetic-core memory, which added to the ENIAC's memory capabilities, which at the time only held a 20-word internal memory.

How much floor space did the ENIAC computer take up?

The computer covered 1,800 square feet of floor space. ENIAC used approximately 160 kilowatts of electricity, causing Philadelphia, Pennsylvania, where the computer was located, to experience brownouts when the machine was in operation.

How large was the ENIAC computer and how much money did it have?

It was a breathtaking enterprise. The original cost estimate of $150,000 would rise to $400,000. Weighing in at 30 tons, the U-shaped construct filled a 1,500-square-foot room. Its 40 cabinets, each of them nine feet high, were packed with 18,000 vacuum tubes, 10,000 capacitors, 6,000 switches and 1,500 relays.

What happened to Univac?

The successful military supplier bought Remington Rand in 1955, acquiring a computer division eventually known as Sperry UNIVAC. Sperry finally dropped the venerable UNIVAC name in 1984.

How many vacuum tubes was used in ENIAC?

But ENIAC could do what it was supposed to. Filling up a 30 X 50 foot room, ENIAC was made of 17, 468 vacuum tubes, 70,000 resistors, and 10,000 capacitors -- not to mention all those lights and switches. Most importantly, the metal giant could add 5,000 numbers in a single second.

How much did the first computer weigh in tons?

The ENIAC was invented by J. Presper Eckert and John Mauchly at the University of Pennsylvania and began construction in 1943 and was not completed until 1946. It occupied about 1,800 square feet and used about 18,000 vacuum tubes, weighing almost 50 tons.

How many kilograms did the ENIAC weigh?

The ENIAC weighed 27,273 kilograms and covered 111 square meters. It was 1000 times faster than the Mark I. Even though computers today are still basically counting machines, they are different in almost every way.

What is the difference between ENIAC and Univac?

UNIVAC is the name of a line of electronic digital stored-program computers. UNIVAC is an acronym for UNIVersal Automatic Computer. ENIAC (Electronic Numerical Integrator And Computer) was the world's first general-purpose computer.

What is the difference between ENIAC and Edvac?

EDVAC (Electronic Discrete Variable Automatic Computer) was one of the earliest electronic computers. Unlike its predecessor the ENIAC, it was binary rather than decimal, and was designed to be a stored-program computer.