- Where do I connect the REM wire?
- How do I turn on my amp without remote wire?
- What does the accessory wire connect to?
- Why is my amp not getting power?
- What Is REM wire on AMP?
- Where do you connect remote wire to amp?
- What is accessory wire stereo?
- What is radio accessory switched 12V wire mean?
- What does REM stand for audio?
- What is SWC connector?
- What Is REM in speaker?
Where do I connect the REM wire?
Some of the more common options for connecting the remote turn on wire when using a factory head unit are to the wire connected to a power antenna (older vehicles which do not turn off the antenna when not using the radio) or to the vehicle's fuse box.
How do I turn on my amp without remote wire?
If the amp doesn't have a remote, then simply use the contact of the reed relay to switch a power control relay for the amp.
What does the accessory wire connect to?
The 12V accessory wire is connected from the stereo to the ignition switch accessory wires. So when you turn on the ignition, it activates the 12V accessory wire to turn on the stereo. This means that the 12V wire must stay connected to power the stereo.
Why is my amp not getting power?
If the Amp Doesn't Power On at All
If the remote turn-on wire doesn't have power, your amp won't turn on. ... This wire is thicker than the remote wire, and it should have battery voltage. If it doesn't, check for any inline fuses and verify that the wire isn't loose, corroded, or shorted out somewhere.
What Is REM wire on AMP?
It stands for Remote, AMPs are kind of like TV sets, you can plug it in but unless you click the power button nothing will happen. So, rem, is the power button. You need to either go to you Head Unit (deck) and splice the wire into the remote trigger or go to your fuse box and use the IGN or ACC fuse.
Where do you connect remote wire to amp?
The turn-on wire (also called the remote wire) is located behind the stereo. On aftermarket stereos, it's usually a blue and white wire. The remote wire will "tell" your amplifier to turn on whenever the stereo is powered up (usually, whenever the vehicle is turned on).
What is accessory wire stereo?
Basically it tells the amp the stereo is on and it should turn on too. The accessory wire is what triggers the stereo to turn on when your ignition key is in the "accessory" position.
What is radio accessory switched 12V wire mean?
The wire that shows less than 12V at that point is the dimmer/illumination wire. It's typically orange or orange with a white stripe. The wire that still shows 12V is the accessory wire, which is usually red in aftermarket wiring harnesses. If only one wire ever had power in this step, it is the accessory wire.
What does REM stand for audio?
A Beginners Guide to Real Ear Measures (REM)
What is SWC connector?
What is a SWC interface? SWC is an acronym standing for Steering Wheel Control. An SWC interface is a module that connects a vehicle's OEM steering wheel controls with an aftermarket headunit or radio replacement unit.
What Is REM in speaker?
Mean power, or root mean square (RMS) power handling, refers to how much continuous power the speaker can handle. ... For example, a speaker with a 30W RMS rating but a peak rating of 60W means that speaker can comfortably run with 30 watts of continuous power, with occasional bursts of up to 60W.