Quickcomputerstips
Under-cutting of tooth (A portion of teeth below the base circle is cut off. When teeth are produced by this process, the tip of one tooth of a gear will not contact the non-involute portion of the tooth of other gear)
- How does interference take place in gears?
- What is meant by interference in gears Mcq?
- What is mean by interference Examveda?
- What is interference and undercutting in gears?
- Does interference occur in all waves?
- What Does interference mean?
- What is meant by interference mating of?
- Which of the following is method of eliminating interference?
- Why tolerances are given to the parts?
- What does lux mean in science?
- What is the SI unit of illumination?
- What is undercutting in gear?
- What is law of gearing?
- How does wave interference occur?
- Can interference occurs in longitudinal waves?
- Does interference occur in transverse waves?
How does interference take place in gears?
When two gears are in mesh it is possible that an involute portion of one will contact a non-involute portion of the other gear. This phenomenon is known as "interference" and occurs when the number of teeth on the smaller of the two meshing gears is less than a required minimum.
What is meant by interference in gears Mcq?
When two gears are in mesh at one instant there is a chance to mate involute portion with non involute portion of mating gear. This phenomenon is described as interference. In case of a pinion, AF is the maximum value of the addendum radius of the pinion. ... The minimum number of teeth on the pinion is given by t = T/G.
What is mean by interference Examveda?
Interference is a phenomenon in which two waves superimpose to form a resultant wave of greater, lower or same amplitude.
What is interference and undercutting in gears?
Interference，the non-conjugate contact between the-teeth of meshing gears, takes place between the tooth tips of one gear and the tooth fillets of the other． ... This action is the result of involute interference between the tip of the rack cutter tooth and the flank of gear tooth and is known as undercutting．
Does interference occur in all waves?
Interference effects can be observed with all types of waves, for example, light, radio, acoustic, surface water waves, gravity waves, or matter waves.
What Does interference mean?
Definition of interference
1a : the act or process of interfering. b : something that interferes : obstruction. 2a : the illegal hindering of an opponent in sports. b : the legal blocking of an opponent in football to make way for the ballcarrier.
What is meant by interference mating of?
Mating of conjugate profiles of a tooth. Mating of involute profiles of a tooth. Mating of non-involute profiles of a tooth.
Which of the following is method of eliminating interference?
Interference can be eliminated by under-cutting of tooth. A portion of teeth below the base circle is cut off. ... In this process a portion of the tip of the teeth is removed, thus preventing that portion of the tip of tooth in contacting the non-involute portion of the other meshing tooth.
Why tolerances are given to the parts?
Explanation: Tolerances are provided to the parts because variations in the material properties introduce errors and production machines themselves have inherent inaccuracies. Another reason to introduce tolerance is that it is not possible to make perfect settings by operator so some tolerances are provided.
What does lux mean in science?
lux, unit of illumination (see luminous intensity) in the International System of Units (SI). One lux (Latin for “light”) is the amount of illumination provided when one lumen is evenly distributed over an area of one square metre.
What is the SI unit of illumination?
Lux (abbreviation lx): The SI unit of illumination value; it is equal to one lumen per square metre.
What is undercutting in gear?
The undercut of gears is also called deeper cutting and indicates the phenomenon of cutting the root of the gear deeper than the involute tooth curve. ... When the undercutting is large, the root of the gear becomes narrower and the tooth form becomes weak in its bending strength.
What is law of gearing?
Law of gearing states that the common normal at the point of contact between a pair of teeth must always pass through the pitch point for all positions of mating gear. ... This is a must condition for the two gears to perform properly.
How does wave interference occur?
Wave interference is the phenomenon that occurs when two waves meet while traveling along the same medium. The interference of waves causes the medium to take on a shape that results from the net effect of the two individual waves upon the particles of the medium.
Can interference occurs in longitudinal waves?
Diffraction and interference effects occur for both longitudinal and transverse waves, and so cannot be used to distinguish between these types.
Does interference occur in transverse waves?
(A) in transverse wave. Hint: Interference takes place for any two waves which are coherent and have zero or constant phase difference irrespective of what type of waves they are. ...
