- What does irrigation decoder do?
- What is a Rainbird decoder?
- What is a decoder cable?
- What is a decoder in programming?
- What is DCC software?
What does irrigation decoder do?
Decoders are electronic devices that are connected to a wire path from an irrigation controller. ... This allows the installation of many irrigation stations (or valves) down the same wire run, rather than requiring a separate power wire for each solenoid.
What is a Rainbird decoder?
Rain Bird decoders are a “true lower than 30 volt” system that utilize a two-wire path of 14-gauge wire connecting the central control system, decoders and valves or valve-in-head sprinklers. ... This makes it easy to expand irrigation coverage using a minimal amount of wire and decoders.
What is a decoder cable?
Decoders are electronic devices that are connected to a wire path from an irrigation controller. They operate irrigation valve solenoids by receiving both signal and power from the same wire path.
What is a decoder in programming?
Decoder programming is the action of entering suitable values into the configuration variables (CVs) in a DCC decoder to set their address, and other parameters so they operate with the characteristics you choose.
What is DCC software?
Digital Command Control (DCC) is a standard for a system to operate model railways digitally. ... The NMRA has trademarked the term DCC, so while the term Digital Command Control is sometimes used to describe any digital model railway control system, strictly speaking it refers to NMRA DCC.