What is a device that is defined as a suspension system that allows a worker to descend in a controlled manner and as needed to stop at any point to perform work?

Rope descent system means a suspension system that allows an employee to descend in a controlled manner and, as needed, stop at any point during the descent. A rope descent system usually consists of a roof anchorage, support rope, a descent device, carabiner(s) or shackle(s), and a chair (seatboard).

1. What safety measures can employers use when workers are on a supported scaffold?
2. When working on a suspended scaffold 10 feet or higher above the working surface or in a bucket truck or aerial lift what safety device should you wear?
3. What places do the OSHA standards for walking and working surfaces exclude?
4. What is suspended scaffolding?
5. How do you convert free fall to minimum?
6. What height do you need to wear a harness?
7. Why is it a safety concern to understand walking surfaces?
8. What is Aisles and passageways?
9. What is considered a walking-working surface?
10. What does PPE stand for?
11. Is a ladder cage Considered fall protection?
12. What is required by this standard for walking and working surface housekeeping?

What safety measures can employers use when workers are on a supported scaffold?

OSHA requires the use of a guardrail OR a personal fall arrest system when working on a supported scaffold. OSHA requires BOTH a guardrail AND a personal fall arrest system when working on a single-point or two-point suspended scaffold. OSHA requires a personal fall arrest system when working on an aerial lift.

When working on a suspended scaffold 10 feet or higher above the working surface or in a bucket truck or aerial lift what safety device should you wear?

OSHA requires workers to wear a full-body harness, (one part of a Personal Fall Arrest System) when they are working on a suspended scaffold more than 10 feet above the working surface, or when they are working in bucket truck or aerial lift.

What places do the OSHA standards for walking and working surfaces exclude?

The exception from the stair requirements in §1910.25(a) only applies to stairs serving floating roof tanks, stairs on scaffolds, stairs on self-propelled motorized equipment, or stairs designed into machines or equipment.

What is suspended scaffolding?

A suspended scaffold is any platform that is supported by ropes suspended from an overhead structure. These are also known as two-point scaffolds. There is a thin line of difference between the two-point scaffolds and suspended supported scaffold like a supported scaffold suspended over the side of the bridge.

How do you convert free fall to minimum?

Self-retracting lifelines and lanyards that automatically limit free fall distances to 2 feet (0.61 m) or less shall be capable of sustaining a minimum tensile load of 3,000 pounds (13.34 Kn) applied to a self-retracting lifeline or lanyard with the lifeline or lanyard in the fully extended position.

What height do you need to wear a harness?

Currently, OSHA requires that employers provide fall protection for construction workers on a walking or working surface with an unprotected edge that is 6 feet or more above a lower level.

Why is it a safety concern to understand walking surfaces?

Even before employees enter the building they can be exposed to walking surface hazards. ... Walking surfaces that are wet, snow covered, or icy — or surfaces that have some type of loose, dry contaminant such as dirt, sawdust, metal shavings or sand on them — can contribute to slip and fall injuries.

What is Aisles and passageways?

Aisles and Passageways. Keep aisles and passageways clear of obstructions or objects that may present a tripping hazard. If mechanical handling equipment is used, ensure there is enough room in the aisle or passageway for employees to walk and for emergency egress.

What is considered a walking-working surface?

Walking-working surface means any horizontal or vertical surface on or through which an employee walks, works, or gains access to a work area or workplace location.

What does PPE stand for?

Personal protective equipment, commonly referred to as "PPE", is equipment worn to minimize exposure to hazards that cause serious workplace injuries and illnesses. These injuries and illnesses may result from contact with chemical, radiological, physical, electrical, mechanical, or other workplace hazards.

Is a ladder cage Considered fall protection?

As of November 19th, 2018, cages are no longer considered compliant fall protection in newly installed fixed ladders. To meet OSHA standards, a personal fall arrest system or a ladder safety system is required.

What is required by this standard for walking and working surface housekeeping?

Employers must ensure that: 1910.22(a)(1): All places of employment, passageways, storerooms, service rooms, and walking working surfaces are kept in a clean, orderly, and sanitary condition. ... 1910.22(d)(1): Walking-working surfaces are inspected regularly and as necessary, and maintained in a safe condition.