Quickcomputerstips
- What is multiplexer explain?
- What is multiplexer in simple words?
- What is multiplexer with example?
- What is multiplexing short answer?
- What is multiplexer in COA?
- Is multiplexer a decoder or encoder?
- What is a multiplexer * 1 point?
- What is multiplexer and types?
- What is multiplexer explain with diagram?
- How does multiplexer work?
- What is latch circuit?
- What is multiplexing in microprocessor?
- What is difference between multiplexer and demultiplexer?
- What is multiplexing in sequencing?
What is multiplexer explain?
In electronics, a multiplexer (or mux; spelled sometimes as multiplexor), also known as a data selector, is a device that selects between several analog or digital input signals and forwards the selected input to a single output line. The selection is directed by a separate set of digital inputs known as select lines.
What is multiplexer in simple words?
A multiplexer (MUX) is a device allowing one or more low-speed analog or digital input signals to be selected, combined and transmitted at a higher speed on a single shared medium or within a single shared device. ... A MUX functions as a multiple-input, single-output switch.
What is multiplexer with example?
A multiplexer is a circuit used to select and route any one of the several input signals to a single output. ... A simple example of an non-electronic circuit of a multiplexer is a single pole multi-position switch. Multi-position switches are widely used in many electronics circuits.
What is multiplexing short answer?
Ans. Multiplexing is used in situations where the transmitting media is having higher bandwidth, but the signals have lower bandwidth. Hence there is a possibility of sending number of signals simultaneously.
What is multiplexer in COA?
A Multiplexer (MUX) can be described as a combinational circuit that receives binary information from one of the 2^n input data lines and directs it to a single output line. ... The multiplexer is often called as data selector since it selects only one of many data inputs.
Is multiplexer a decoder or encoder?
The encoder is a combinational circuit element that encodes a set of binary codes into another set of binary codes containing a smaller number of bits. The multiplexer is a combinational circuit element that channels one of its many inputs to its only output depending on the selection inputs.
What is a multiplexer * 1 point?
A multiplexer (or MUX) is a device that selects one of several analog or digital input signals and forwards the selected input into a single line, depending on the active select lines.
What is multiplexer and types?
There are mainly two types of multiplexers, namely analog and digital. They are further divided into FDM, WDM, and TDM.
What is multiplexer explain with diagram?
Multiplexer is a combinational circuit that has maximum of 2n data inputs, 'n' selection lines and single output line. One of these data inputs will be connected to the output based on the values of selection lines. ... So, each combination will select only one data input. Multiplexer is also called as Mux.
How does multiplexer work?
A multiplexer is a system of multiple inputs and just one output to receive signals coming from multiple acquisition networks. The device transfers all input signals to a microprocessor, which receives and processes the data, transmits it to the output devices, and controls the system as a whole.
What is latch circuit?
In electronics, a flip-flop or latch is a circuit that has two stable states and can be used to store state information – a bistable multivibrator. The circuit can be made to change state by signals applied to one or more control inputs and will have one or two outputs.
What is multiplexing in microprocessor?
In telecommunications and computer networks, multiplexing (sometimes contracted to muxing) is a method by which multiple analog or digital signals are combined into one signal over a shared medium. The aim is to share a scarce resource.
What is difference between multiplexer and demultiplexer?
A multiplexer is a combinational circuit that provides single output but accepts multiple data inputs. A demultiplexer is a combinational circuit that takes single input but that input can be directed through multiple outputs. It performs parallel to serial conversion.
What is multiplexing in sequencing?
Sample multiplexing, also known as multiplex sequencing, allows large numbers of libraries to be pooled and sequenced simultaneously during a single run on Illumina instruments. Sample multiplexing is useful when targeting specific genomic regions or working with smaller genomes.
