What structured cable do yo use for a desk top user?

1. What is structured cable used for?
2. What are the different standard used in structured cabling?
3. How do I know what type of network cable to use?
4. What is structured cabling and give its types?
5. What is the difference between Cat 5 and Cat5e cable?
6. Which cables should never be used in a structured cabling installation?
7. What is TIA cable?
8. What cable is not recognized in the Structured 568 cabling standards?
9. What type of cable do most networks use?
10. Which type of network cable is commonly used to connect office computers to the local network?
11. Which cable type is a common choice for use on Ethernet networks?
12. What is a structured cable technician?
13. What is Cat 6 cable used for?
14. Which is better CAT 5 or Cat6?

What is structured cable used for?

A structured cabling system is a complete system of cabling and associated hardware, which provides a comprehensive telecommunications infrastructure. This infrastructure serves a wide range of uses, such as to provide telephone service or transmit data through a computer network.

What are the different standard used in structured cabling?

The ANSI/ITA-568 and ISO/IEC 11801 are the two names you need to know because these two are the main structured cabling standards. The way cabling and equipment are laid out & organized in the structured system is governed by some certain stringent rules and regulations.

How do I know what type of network cable to use?

Your primary concern in determining the type of cabling to use is your network's current bandwidth requirements. This figure can vary greatly based on the size of the network (i.e. the number of workstations connected to the network).

What is structured cabling and give its types?

In telecommunications, structured cabling is building or campus cabling infrastructure that consists of a number of standardized smaller elements (hence structured) called subsystems. Structured cabling components include twisted pair and optical cabling, patch panels and patch cables.

What is the difference between Cat 5 and Cat5e cable?

The difference between Cat5 and Cat5e is that the Cat5e has a higher throughput speed of 1,000 Mbit / s. Also called Gbit / s. This is 10 times faster than the throughput speed of a Cat5 cable. When in doubt about either choosing a Cat5 or Cat5e cable, we can advise you to go for the Cat5e cable.

Which cables should never be used in a structured cabling installation?

Coax cable should not be used in structured cabling networks.

What is TIA cable?

TIA and EIA standards for Category 6 and 6a

The TIA and EIA standards for Category 6a cables support 10GBase-T networks. Like Cat5e, the Cat6 cables are usually terminated in 8P8C connectors.

What cable is not recognized in the Structured 568 cabling standards?

(Note: distances are the total cable length allowed between the main cross-connect and the horizontal cross-connect, allowing for one intermediate cross-connect.) Note: Coaxial cabling is not recognized by the ANSI/TIA-568-C version of the standard.

What type of cable do most networks use?

Twisted pair cabling comes in two varieties: shielded and unshielded. Unshielded twisted pair (UTP) is the most popular and is generally the best option for school networks (See fig. 1). The quality of UTP may vary from telephone-grade wire to extremely high-speed cable.

Which type of network cable is commonly used to connect office computers to the local network?

An Ethernet crossover cable is a type of twisted pair Ethernet cable used to connect computing devices together directly that would normally be connected via a network switch, Ethernet hub or router, such as directly connecting two personal computers via their network adapters.

Which cable type is a common choice for use on Ethernet networks?

There are three cable types commonly used for Ethernet cabling: coaxial, twisted pair, and fiber-optic cabling. In today's LANs, the twisted pair cabling is the most popular type of cabling, but the fiber-optic cabling usage is increasing, especially in high performance networks.

What is a structured cable technician?

A structured cabling technician handles responsibilities related to the installation, repair, and maintenance of cable systems and associated hardware. In this role, your duties require you to use hand and power tools as well as work in small spaces and from various heights.

What is Cat 6 cable used for?

What is a Cat6 Cable? Category 6 cable, also commonly known as network, LAN or Ethernet data cable, is a 4 twisted pair sheathed copper wire cable which can support data transfer rates of up to 1 gigabits (1,000 megabits). This higher bandwidth allows for quick transferral of large files in an office network.

Which is better CAT 5 or Cat6?

What are the Advantages of a Cat6 Ethernet Cable? Compared to Cat5/5e cables, Cat6 cables have stricter performance specifications and significant higher data transfer speeds at greater distances. They are more tightly wound than Cat5 cables, and the cable conductors and cable sheath are thicker as well.