Quickcomputerstips
- What are the 3 components of a personal fall arrest system?
- What are the components of fall arrest system?
- Which of the following are not accepted as part of a personal fall arrest system?
- What are the three basic components of a personal fall arrest system quizlet?
- What are the 3 types of falls that occur on a construction site?
- What are the 4 types of fall protection?
- What is personal fall protection equipment?
- Which of the following is a fall protection system?
- What part of your personal fall arrest system secures your body harness to the anchorage system?
- Which of the following is a personal fall arrest system that allows a worker to keep both hands free while leaning into it?
- What opening does not require guardrails?
- What are the three components of guard rail system?
- What scaffold components are required to be part of any supported scaffold built above 10 feet?
What are the 3 components of a personal fall arrest system?
Personal fall arrest system means a system used to arrest an employee in a fall from a walking-working surface. It consists of a body harness, anchorage, and connector. The means of connection may include a lanyard, deceleration device, lifeline, or a suitable combination of these.
What are the components of fall arrest system?
Personal fall arrest systems (PFAS) consist of three elements: a full-body harness, designed specifically by work-place application; a shock-absorbing lanyard or self-retracting lifeline engineered to take the strain out of a fall; and an anchorage connector guaranteeing the most secure base connection possible.
Which of the following are not accepted as part of a personal fall arrest system?
Effective January 1, 1998, body belts and non-locking snaphooks are not acceptable as part of a personal fall arrest system.
What are the three basic components of a personal fall arrest system quizlet?
Fall arrest systems consist of three components: Harness, lifelines/lanyards and anchorages.
What are the 3 types of falls that occur on a construction site?
Falls can be categorized into three types: falls on a single level, falls to a lower level, and swing falls.
What are the 4 types of fall protection?
All active fall protection for the construction industry falls into four basic categories: fall arrest, positioning, suspension, and retrieval. OSHA provides standards for each category of fall protection.
What is personal fall protection equipment?
Fall Restraint systems prevent you from falling. They use a body holding device connected to a reliable anchor, preventing you from reaching zones where the risk of fall exists. Fall restraint is sometimes referred to as 'Restraint' or a 'Work Restraint' system.
Which of the following is a fall protection system?
Generally, fall protection can be provided through the use of guardrail systems, safety net systems, or personal fall arrest systems. OSHA refers to these systems as conventional fall protection. Other systems and methods of fall protection may be used when performing certain activities.
What part of your personal fall arrest system secures your body harness to the anchorage system?
A lanyard is a flexible line securing a full-body harness to an anchorage point. There are two basic categories: non-shock-absorbing and shock-absorbing.
Which of the following is a personal fall arrest system that allows a worker to keep both hands free while leaning into it?
A positioning device system is a body harness system rigged to support an employee on an elevated vertical surface such as a wall. The system allows an employee to work with both hands free while leaning.
What opening does not require guardrails?
Section 1926.451(b)(3) does not require fall protection or guardrails when: (1) the front edge of the platform is 14 inches (36 cm) or less from the face of the work; (2) when outrigger scaffolds are 3 inches (8 cm) or less from the front edge;1 and (3) when employees are plastering and lathing 18 inches (46 cm) or ...
What are the three components of guard rail system?
A standard railing should consist of a top rail, intermediate rail and posts, and shall have a vertical height of 42 inches.
What scaffold components are required to be part of any supported scaffold built above 10 feet?
Guardrails, a personal fall arrest system, or both must protect each employee more than 10 feet (3.1 meters) above a lower level from falling. A competent person must inspect ropes for defects prior to each workshift and after every occurrence that could affect a rope's integrity.
